|
Post by Koala on Apr 17, 2017 12:24:20 GMT 10
I know it is hard to come by but I am looking for some diamond pattern aluminium from the 60's.
So it you are wrecking a van rather than restoring please let me know. Needed for resheeting a section of a 7' wide van.
Koala
|
|
|
Post by Franklin1 on Apr 17, 2017 19:21:15 GMT 10
G'day young Ken, No, I don't have any Ali sheeting for you, but I always remember the story of forum member "viscountofmydomain" finding a donor sheet of ali from supposedly the same model Viscount Ambassador, only to find the sheet was about an inch narrower than what he needed (see his story here ). And so the moral of the story is to double-check whether any donor sheet is really the width you want, before rushing out with a trailer to pick it up. Best of luck with your hunt. cheers, Al.
|
|
|
Post by Koala on Apr 18, 2017 8:50:41 GMT 10
G'day ole Al, once again I thank you for your wise advice I realise that i am searching for the needle in the haystack but if Murray can find the last Sunliner door handles then I have a chance:)) By the way I am looking for flat sheet of diamond pattern aluminium without a profile. 6'12" Wide Koala
|
|
|
Post by willies on Apr 18, 2017 12:33:22 GMT 10
G'day ole Al, once again I thank you for your wise advice I realise that i am searching for the needle in the haystack but if Murray can find the last Sunliner door handles then I have a chance:)) By the way I am looking for flat sheet of diamond pattern aluminium without a profile. 6'12" Wide Koala Does 6'12" equal 7'? How long? I don't have any but thought I would ask for clarification.
|
|
|
Post by Koala on Apr 18, 2017 15:47:09 GMT 10
Yes it is 7' long. I was just testing Al to see if he is on the ball after his afternoon snooze Koala
|
|
|
Post by bayllie on Apr 22, 2017 19:16:01 GMT 10
Can send you a photo of what we have if you like, in Singleton NSW
|
|
|
Post by Mustang on Apr 23, 2017 8:10:58 GMT 10
There was a post here recently about new sheeting in the diamond pattern, I have had a search but haven't found it.
|
|
|
Post by Koala on Apr 23, 2017 13:30:54 GMT 10
Hi Bayllie, I will look at any diamond pattern sheeting which you may have. Can email photos direct to me at jherne@bigpond.net.au
Thanks Koala
|
|
|
Post by bayllie on Apr 24, 2017 12:23:54 GMT 10
Hi Koala, could you send me your mobile number, having trouble uploading photos via email, we have all cladding from a 1965 10 foot viscount here if that helps
|
|
|
Post by piamia on Apr 26, 2017 19:06:08 GMT 10
Hi, I am seeking diamond pattern ceiling panels for my 1960s Roma. I have a small remnant section and I believe my remaining panels are made from some kind of masonite or compressed chipboard. I would love to restore the ceiling to its original glory. If anyone on this thread has a breakthrough in finding a good replica I would be thrilled to hear about it. Here is link to the original remnant in my van. i349.photobucket.com/albums/q378/PiaMia15/20170412_140936_zpsirlinkgw.jpg Pia
|
|
|
Post by hillbill54 on Apr 27, 2017 17:54:39 GMT 10
Go to page 4 about 2/3rds way down an read jondi..it might help you.
|
|