|
Post by aussieute on Sept 26, 2019 9:15:50 GMT 10
Hi all cannot find large sheets of 4.8 mm thick Masonite have found 3.2 would that be ok to put on the side walls of the Jennison with glue and nails as the old 4.8 mm was just nailed I want to do minimum joins and the van is a tad over 3 meters long and can only find 2.4 long sheets the roof can be done in 4.8 as that cops most of the weather hope someone can help thanks chris
|
|
|
Post by Roehm3108 on Sept 26, 2019 10:56:00 GMT 10
Hi Aussieute Have you looked at the Gunnerson website? They have hardboard (same as Masonite) 4.8mm thick in lengths up to 3050mm. Looks like you can get it in standard or tempered.
|
|
|
Post by aussieute on Sept 26, 2019 12:13:59 GMT 10
Hi Roehm 3108 they were one of the ones I rang largest sheet is 2700 they said there website must be wrong it is in very short supply at moment and a lot of places have it listed but don't have any and every one I have rang don't have tempered sheets anymore said mdf is cheaper so don't sell a lot anymore the 3.2 mm i have found has been in stock for 3 years cheers chris
|
|