tbeck
New Member
Posts: 32
|
Post by tbeck on Mar 3, 2014 8:30:06 GMT 10
Does anyone know where I can purchase aluminium strip, like that used around the edges of old laminex tables? I would like to use it for my caravan benchtop.
Cheers
|
|
|
Post by Rattles on Mar 3, 2014 9:09:56 GMT 10
|
|
bigkel
Full Member
If you never never go, you never never know.
Posts: 248
|
Post by bigkel on Mar 3, 2014 11:57:04 GMT 10
I did this in the Sunliner ,, found an old Volvo roof rack ( careful when spelling old Volvo ) buffed up the Stainless strips ,fitted to bench front and splash back looks good i think , but only for straight areas , cost $0 , cheers kel.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 3, 2014 12:55:01 GMT 10
Does anyone know where I can purchase aluminium strip It's called table edge and, as Rattles suggested, you can get it from Capral Aluminium. I copied and pasted this from one of my earlier posts... Capral Download their pdf catalogue (Little Green Book) here… www.capral.com.au/australian-aluminium-centres For table edge look up pages 53 & 54….. Table edge ribbed (1950’s style)… Catalogue# 808198 Mill Finish MOULDING TABLE EDGE S 29.36X5.92 X 4 metres Table edge convex (1950’s style)…. Catalogue# 808736 Mill Finish TABLE EDGE 27.7X12.7 X 4 metres Table edge flat (1960’s onwards style)… Catalogue# 810996 Mill Finish TABLE EDGE 20.62X6.73 X 4 metresI tried to get some to to match the existing profile that's used in my van (commonly used throughout the 50's & 60's) but unfortunately that style is no longer available. So I opted for another profile...there are about 3 or 4 styles available @ around $6 per 4mtr length. You can also get it from Action Aluminium.
|
|
tbeck
New Member
Posts: 32
|
Post by tbeck on Mar 3, 2014 20:54:45 GMT 10
Thankyou everyone!
|
|
|
Post by kerri on Oct 7, 2017 18:35:05 GMT 10
Does anyone know where I can purchase aluminium strip It's called table edge and, as Rattles suggested, you can get it from Capral Aluminium. I copied and pasted this from one of my earlier posts... Capral Download their pdf catalogue (Little Green Book) here… www.capral.com.au/australian-aluminium-centres For table edge look up pages 53 & 54….. Table edge ribbed (1950’s style)… Catalogue# 808198 Mill Finish MOULDING TABLE EDGE S 29.36X5.92 X 4 metres Table edge convex (1950’s style)…. Catalogue# 808736 Mill Finish TABLE EDGE 27.7X12.7 X 4 metres Table edge flat (1960’s onwards style)… Catalogue# 810996 Mill Finish TABLE EDGE 20.62X6.73 X 4 metresI tried to get some to to match the existing profile that's used in my van (commonly used throughout the 50's & 60's) but unfortunately that style is no longer available. So I opted for another profile...there are about 3 or 4 styles available @ around $6 per 4mtr length. You can also get it from Action Aluminium. Thank you so much for this information. Kerri
|
|
|
Post by cobber on Oct 7, 2017 19:59:05 GMT 10
|
|