|
Post by ozman on Sept 22, 2009 20:21:24 GMT 10
Hey Guys
can any help out with the rubbers for the wrap around windows (part #, where to get them, what to ask for etc)
The Mrs has given me a deadline of 2ns week in the school hols to be on the road.. anyway gotta go - lots og hours to put intonight
thanks
Jason
|
|
|
Post by humpty2 on Sept 22, 2009 21:04:00 GMT 10
If you mean the front and back windows, try Spectrum rubber. I think they are around St. Marys area. If you are after the rubber for the aluminium windows look up "Tonyh" on this forum.
|
|
|
Post by viking on Sept 22, 2009 22:34:26 GMT 10
I ran into the Ormiston Rubber site a few weeks ago, it has quite a few extruded rubbers available. Download the PDF catalogue from www.ormistonrubber.com.au/catalogue.phpI haven't used them myself, was just looking for something else and thought it might come in useful in the future.
|
|
|
Post by boblor on Sept 23, 2009 9:36:18 GMT 10
Hi ozman Contact Spyder on the forum, he is the expert on these windows, has replaced / assisted with the replacement of these windows. Best of luck. Cheers boblor
|
|
|
Post by ozman on Sept 24, 2009 20:49:39 GMT 10
thanks guys - i spoke with Spyder and he put me in touch with the guys who will make some new font windows (thanks John - ordered them yesterday with Wally).
If someone has a photo of the profile for the front windows that would be helpful - saves me getting something that wont do the job...
|
|
|
Post by dianevuk on Sept 26, 2009 6:14:15 GMT 10
hi Jason I'm guessing you are in Sydney ? I am after the same information on Sunliner windows and rubbers ....could I get the contact details from you ? thanks Diane
|
|
|
Post by JBJ on Sept 26, 2009 7:24:20 GMT 10
Hi Diane,
If you contact Spyder by PM or email, he can supply new curved perspex front rear windows. Rubbers can be bought from most auto upholstery shops.
JBJ
|
|