Windows ??? Sunliner pop to Wrap

[Eck]

Hi All ,
I'm planning on Restoring a 60's sunliner with Pop out windows & I would like to know if Wrap around windows from the 58 , 59, or 60 model can fit a later model instead of Pop outs I'm sure someone here would know if it can be done. The Bodies look the same to me apart from small changes. Is there anywhere that sells the wrap Windows? if you have any informtion about converting pop out Windows to Wrap windows please drop me a post / Thanks Eck

[humptydumpty]

Why would you bother to do it. I think the changes to the body would not be worth the trouble........and the swing out aluminium windows are far less troublesome than the perspex windows. I have both types of Sunliners here at Newcastle and my plan is to eventually sell the one with the wrap round windows.
Also consider the ventilation benefits of the aluminium windows

[willandlyn]

;D
mr Dumpty did you say you might sell a sunliner ?
huh!!! you did say that
when and how much
what condition how much to get it to Perth

Your friendly eagle eye sunliner for sale spotter
Will ;D ;D

[grobinson]

I have a Sunliner van in good original condition which will be for sale later on this year. Early 60's model I think
as it has a c section chassis.
Regards
Glenn

[willandlyn]

;D ;D ;D
Gidday eck
Its all too much trouble doing up old vans pop out windows fixed windows just pack it all in and sell the sunliner to me
and then you wont have to worry about it
how about that for a good idea

Will sunliner snoop


I want a sunliner ASAP can anyone help me out\
and the main reason is im looking at an A model already rodded and it will look cooool !!!! with a Sunliner attached to it

[willandlyn]

gidday Glen yippee

where is it and how much
hows that for getting to the point

I would appreciate some info glen [e-mail] au

thanks
regards

Will

[eck]

Hmmmmmmm ! What's all that crap got to do with Sunliner Windows???

[Roehm3108]

you're right eck ------ got a bit sidetrack
you must still be young!!!!! ;D ;D ;D to notice!!!
Ray

[lyn and Will]

Aargh what the Eck!!!
your right Eck it is all crap in the end it means S.F.A.
lets help Eck with the windows

there is a guy in Queensland that moulds windows and Taillights for vintage cars etc
My upholsterer just got some stuff back and the new product was identical to the sample sent numbers and all
I will endeavour to post it for you Eck I will be seeing them on monday

Will

[humptydumpty]

Eck, We still don't know where you are. There are 2 sets of wrap windows being done at a Liverpool firm right now. Have you made a decision to stick with the flat windows or attempt to put the wraps on it. I know of a bloke near me that put Lexen over the window hole where Flat windows were, then used 'Sicaflex' in an attempt to seal it.........didn't work!!!!! even though he screwed it every 100mm
I still don't think the conversion can be done without a lot of fibreglassing to recreate the correct 'holes'.

Regards Peter

[52chevygirl]

Humpty, are the windows being done now the blow moulded ones wrap style??? how much???
I mentioned in another thread that we had some quoted on and the guy wanted 700-900 for each mould and there would be four moulds because every window bends a different way.. ouch .. we got the heat gun out and bent up some new ones and they look ok... better than the white broken things that were in there.. I still would be interested in a second set.. you know just in case..
we made ours out of a tinted perspex ..
There was a guy at the Nationals that had a sunliner with the
wraps changed into a aluminium style but to go the other way sounds pretty hard to me... Where our windows fit in the
fibreglass is moulded as well... can take photos if you are interested..
Deb

[humptydumpty]

Deb, contact Spyder on this forum...you will get a pleasant surprise. They are being done on a mould which he owns. Dennis is getting a set done too, and I think that including delivery he is getting the 4 delivered cheaper than you can get 1 made for

[spyder]

To 52chevygirl
I can contact you with a guy who can get the wrap around windows if you contact me at [e-mail] leave your phone number & I will ring you back as I am not too good on theese computer contraptions John