|
Post by viscountofmydomain on Dec 11, 2014 14:30:06 GMT 10
I am putting this request out there as a very long shot that someone might have/or know of one. I am after a rear skin panel for my '66 viscount ambassador, it goes from below the rear window to the bottom of the van and holds the number plate and tail lights. I'm sure any year around that would do. The panel has a diamond pattern. I am willing to remove the panel from the donor van if needed. I'm located in the Illawarra area so it would preferably need to be within half a days drive. I'm getting picky now aren't I, I did say it was a long shot. (I would prefer to replace my panel rather than repair as I plan to polish the van, I don't want to cover with checker plate either, but may have to if I have no luck. My panel has several old repairs from a previous owner).
|
|
leeron
Junior Member
1966 Viscount Duralvan 14' 6
Posts: 69
|
Post by leeron on Dec 27, 2014 17:23:30 GMT 10
I have a 65 model and it has the diamond pattern Aluminium. This Alloy sheet is called cuniform. I was told recently there was someone in Sydney that can roll the horizontal ribs into the sheet but not sure if the cuniform pattern is still available, closest thing I can find is from Rimex metals.
|
|
leeron
Junior Member
1966 Viscount Duralvan 14' 6
Posts: 69
|
Post by leeron on Jan 22, 2015 19:39:09 GMT 10
|
|