molly
New Member
Finally, I joined in 2011... and now I'm getting around to my van...yayyyyy
Posts: 7
|
Post by molly on Nov 12, 2018 16:57:46 GMT 10
I'm wondering if anyone can help me source the plastic window moulding for my viscount (1977 we think). The top piece is 25mm x 12mm and the curved bottom bit is 35mm x 10mm or 40mm x 10mm.
|
|
|
Post by Mustang on Nov 14, 2018 9:51:23 GMT 10
I think Camec have it, I have to get some also , I will let you know.
|
|
jon
New Member
Posts: 11
|
Post by jon on Nov 30, 2018 15:02:10 GMT 10
Hi Molly!! Take a look at Procom plastics website, they're situated in Cambelfield Melbourne for obvious reasons, caravan manufacturers mecca, anyway they make the stuff.
Cheers Jon.
|
|
|
Post by richo66 on Jan 17, 2019 18:41:14 GMT 10
vintage caravan spares (a seller on ebay ) has been an awesome source for these for my van
|
|
|
Post by Mustang on Jan 18, 2019 9:49:28 GMT 10
I'm wondering if anyone can help me source the plastic window moulding for my viscount (1977 we think). The top piece is 25mm x 12mm and the curved bottom bit is 35mm x 10mm or 40mm x 10mm. I found what suited me (same as Viscount original) at Caravans Plus ACT. It is very easily trimmed with a Stanley knife.
|
|