viscount60
New Member
us and the 60 Viscount
Posts: 27
|
Post by viscount60 on May 10, 2014 23:35:40 GMT 10
Can anyone help me source this plastic table edging for my Van. Also can anyone guess my vans age. I think it's a 60s Millard, It has M 4773 chassis number and a M Deluxe sticker.
|
|
viscount60
New Member
us and the 60 Viscount
Posts: 27
|
Post by viscount60 on May 10, 2014 23:40:20 GMT 10
Here is another couple of related pics of the inside where the table edging is used.
|
|
viscount60
New Member
us and the 60 Viscount
Posts: 27
|
Post by viscount60 on May 10, 2014 23:41:20 GMT 10
And again
|
|
|
Post by cobber on May 11, 2014 9:56:19 GMT 10
G'day viscount60, Have a read of this thread for a few clues on where you might source table edging. another alternative if you're prepared to go with aluminium mould is to click here and go to page 53 and 54. Good luck, let's know how you go with it and I'll start a special thread on 'table edging' in the vintage parts suppliers board. Cobber.
|
|
|
Post by shesgotthelook on May 11, 2014 10:03:48 GMT 10
|
|
viscount60
New Member
us and the 60 Viscount
Posts: 27
|
Post by viscount60 on May 11, 2014 21:48:21 GMT 10
Thanks cobber and shesgotthelook for your advice. But it's not aluminium. It's a kind of plastic that's very flexible. Bit shiny like the car trimming you suggested but it has a lip similar to the aluminium edging.
Any further clues anyone?
Rex
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 12, 2014 8:49:33 GMT 10
|
|
1966princess
New Member
hi we are not quite sure how to use this site. We have a millard 1966 princess deluxe
Posts: 2
|
Post by 1966princess on Sept 2, 2014 9:56:56 GMT 10
our van we know is 1966 its a princes deluxe m 4867 if thats any help.
|
|