|
Post by jmooney1965 on Jul 28, 2013 14:15:48 GMT 10
Calling all Viscount Ambassador owners, Can anyone tell me or provide photos for the mechanism for the folding couch/bed. Ours was taken out before we bought the van. We have investigated buying new futon style types at stores like Freedom etc. but they all fold down at the back and we need to pull it forward from the front. If you have a van with this type of set up can you let us know how it works and possibly attach photos. So we can go forward with putting one into our van. Also if anyone knows where to buy the mechanism that would be helpful too! Yours in anticipation, J
|
|
|
Post by humpyboy on Jul 30, 2013 19:33:37 GMT 10
|
|
|
Post by jmooney1965 on Jul 31, 2013 15:03:12 GMT 10
Looks good! Can we have some measurements to ensure it would fit in our viscount. The width of the lounge The height when in sitting position from the floor to the top of the back upright part. The width front to back when it is folded down. If the measurements are right we would be VERY interested in purchasing. Thanks for the response J
|
|
|
Post by shesgotthelook on Jul 31, 2013 15:21:45 GMT 10
I think you will have to go to the classic forum & contact tedalley via personal message. He is the one selling it.
I've had a look at my viscount day-niter but can't figure how to photograph! They are very hard to get at.
|
|
|
Post by jmooney1965 on Jul 31, 2013 17:47:44 GMT 10
Thanks for the heads up! Have been back into Classic site and posted reply! Thanks for trying to assist - we appreciate the effort. J
|
|
|
Post by tedalley on Aug 1, 2013 21:48:02 GMT 10
Jackie Hi, I posted the same reply in Classic Caravans. Where are you located? The lounge is in great condition. It sits on a base that is 250mm high but I wanted to retain the base 'cause it has the curved profile that matches the front curved wall and I intend on building a club lounge. The length is 1930mm. The width is 780mm sitting (picture 1) & 1005mm folded down (picture 2). Height from floor to top of back = 800mm.
We also have rolls & rolls of upholstery material if you are interested.
Hope your not too far away Ted
|
|
|
Post by jmooney1965 on Aug 2, 2013 17:10:34 GMT 10
Hi Ted, We are happy with the measurements of the lounge and would like to purchase. We are located in Beechworth Victoria about 40 mins south of Albury/Wodonga. I would be happy to investigate freight costs for the item as I believe being in Sutherland Shire you would possibly be south of Sydney somewhere. What sort of price did you have in mind for the lounge? Jackie Read more: ditzygypsy.proboards.com/thread/2369/franklin-nite-day?page=1#scrollTo=20614#ixzz2anCGcqEy
|
|
|
Post by tedalley on Aug 19, 2014 13:28:03 GMT 10
Hi Ted, We are happy with the measurements of the lounge and would like to purchase. We are located in Beechworth Victoria about 40 mins south of Albury/Wodonga. I would be happy to investigate freight costs for the item as I believe being in Sutherland Shire you would possibly be south of Sydney somewhere. What sort of price did you have in mind for the lounge? Jackie Read more: ditzygypsy.proboards.com/thread/2369/franklin-nite-day?page=1#scrollTo=20614#ixzz2anCGcqEyJackie Hi.
I was just wondering how the nite n day finished up looking?
Regards Ted
|
|